October 2013 - Albright Technologies

Alternative Methods of Prototyping Liquid Silicone Parts

Earlier this month Albright Technologies' project engineer, Matt Bont, gave a presentation at the Shin-Etsu Silicones Open House on Alternative Methods of Prototyping Liquid Silicone Parts. Click here to view the presentation as well as other presentations from industry suppliers. Click here to read the rest of the October newsletter.

What is the best test to determine the sealing capability of a silicone compound or design?

Two common tests are (1) to put the device or component under pressure using regulated compressed air and then submerging in water or other fluid. The leaks will show as bubbles or (2) use a colored die solution that contrasts with your part colors under pressure and the die will highlight leaks. Ultimately whenever possible

Life Expectancy of a Silicone Part

While it depends on the specific application, generally molded silicone parts will have a considerable life expectancy. Once fully cross-linked a silicone rubber part will be virtually inert, meaning it won't degrade or react chemically with most anything in the environment, aggressive solvents can break silicone down. Compared to thermoplastic elastomers and other rubbers silicone

Monthly Archives: October 2013

Alternative Methods of Prototyping Liquid Silicone Parts

What is the best test to determine the sealing capability of a silicone compound or design?

Life Expectancy of a Silicone Part

Latest News

Location & Contact

About Us

Latest Tweets

Most Popular